**** DONE 1/48 Tamiya Me 262 A-2 Heavy Hitters Group Build

**Crimea_River** · 11-02-2009 10:49 PM

Messerschmitt Me 262 A-2a 9K+YH of 1/KG 51 Autumn 1944

User Name: Crimea River
First Name: Andy
Category: 1 Advanced
Scale: 1/48
Manufacturer: Tamiya
Type: Messerschmitt Me-262 A-2 with Kettenkrad
Pilot and further details on this aircraft unkown pending more research.
Plan to use OOB decals, add scratch built details and PE seatbelts.

This is a proposed entry subject to Judge's OK (see bbelow). Let me know guys. Photos were taken today.

DECLARATION! JUDGES' CALL REQUESTED! A small amount of work was started before the official kick-off of this Group Build. This was accomplished on a beautiful Saturday in August whilst contemplating life under the ash tree in my yard. A Marguerita may have been involved also. Also a small bit of bit of painting was done in October. The specific prework is limited to the following described below. None has been done since.

Items 1. Kettenkrad parially assembled and brush painted. Bogies painted on the sprue.
Items 2. Bomb halves glued together
Items 3. Aluminum paint on parts still on sprue
Items 4. Parts B5 and B19 glued into wheel well prior to painting.

**Airframes** · 11-02-2009 11:30 PM

No problem as far as I'm concerned Andy. It's only a bit of prep work, far as I can see, so if it's OK with the other judges, fine.

**vikingBerserker** · 11-02-2009 11:34 PM

Very nice selection CR!

**dirkpitt289** · 11-03-2009 12:18 AM

I OBJECT!!!! Just kidding. I can't wait to see this one build. Post lots of pictures if you can

**Vic Balshaw** · 11-03-2009 03:52 AM

Nice Andy, looking forward to the nitty gritty on this one, have one in my stash for a rainy day

**lesofprimus** · 11-03-2009 06:05 AM

No problem with the pre-work Andy... Im sure the other Judges have no problem either....

And for the record, u are the first member to put their mettle into the Advanced Catagory....

**Wayne Little** · 11-03-2009 06:52 AM

No Problem here with the Pre-work Andy, the 262 kit is real beauty, I used this kit with the 2 gun nose for my White 2 in the Defence of the Reich Build, check it out for some progress work...might help.

**Crimea_River** · 11-03-2009 08:06 AM

Thanks guys. Will post lots of progress shots once I get going. As usual, I will collect lots of references before committing to anything but the simpler stuff (as already done).

I debated about the selecting the advanced catgory but what the heck, it's for fun anyway right?

Wayne, I had already looked at your fantastic 262 build before but will be going back again and again. Thanks for the reminder. Might get that macro lens too!

**Wurger** · 11-03-2009 10:43 AM

I echo posts #2,6,7. Nice choice.

**Crimea_River** · 11-03-2009 09:19 PM

Can anyone recommend a good reference book(s) for the 262? I like detail shots and good profiles. I've seen one photo of "White Y" around but am interested to know if there are more.

**Crimea_River** · 11-03-2009 10:07 PM

Here are a few more shots taken today of what's been done so far.

1st Image Just some aluminum paint sprayed around the interiors. OOB pedals are in the cockpit, although the cockpit needs a coat of RLM 66. pedals will be touched up again later.
2nd Image Aluminum-painted well well area with some of the wall framing assembled.
3rd Image The Kettenkrad bogies and tracks. The tires on the bogies are done with a 0.2mm black Pigma Micron permanent marker "borrowed" from my wife's scrapbooking stuff. Not sure what colour the tracks will be yet. Need to research a bit. This thing is TINY!!!

4th Image The Kettenkrad body, partly assembled.