 | B-17 underside Ball Turret Gunner| Aviation Discuss B-17 underside Ball Turret Gunner in the World War II - Aviation forums; After watching a B-17 flying recently, I was curious how the underside ball turret gunner entered/exited the turret. ... |
|
06-03-2008, 02:52 PM
|
#1 | | Member
Join Date: Mar 2008
Posts: 44
Country: | B-17 underside Ball Turret Gunner After watching a B-17 flying recently, I was curious how the underside ball turret gunner entered/exited the turret. Was it from below or from inside? I had heard a couple of horror stories of how they were trapped if they aircraft had to do a wheels-up landing, etc., but I didn't know if they were true or not. I would think it would be terribly uncomfortable to be in one of those things for hours on end, or stuck in one with the electricity out and so on.
Thanks in advance for any answers. |
| |
06-03-2008, 02:57 PM
|
#2 | | Senior Member
Join Date: Sep 2006 Location: Dordrecht
Posts: 2,094
Country: | Quote:
Originally Posted by olbrat After watching a B-17 flying recently, I was curious how the underside ball turret gunner entered/exited the turret. Was it from below or from inside? I had heard a couple of horror stories of how they were trapped if they aircraft had to do a wheels-up landing, etc., but I didn't know if they were true or not. I would think it would be terribly uncomfortable to be in one of those things for hours on end, or stuck in one with the electricity out and so on.
Thanks in advance for any answers. | Inside. During start and landing, the gunner was not present in the ball, but stayed with the others in the hull. Only when entering enemy territory, he had to climb into his seat, so he wasn't there the whole flight. This was bad enough as the position is very cramped and often the gunner had to be pulled out by his mates as he wasn't able to move his legs anymore, because of bad blood circulation..
__________________ 
"I'm no hero. Soldiers on the ground, they are heroes. In an aircraft you can always evade the bullets."
-Jan Linzel, Dutch fighter pilot |
| |
06-03-2008, 03:04 PM
|
#3 | | "Shooter"
Join Date: Sep 2004 Location: Moorpark, CA
Posts: 12,476
Country: | Maximum height for a ball-turret gunner was 5'4". It was very cramped. There is a hatch on the ball that the gunner would climb into once airborne. I have some shots of it somewhere.
__________________ http://www.vg-photo.com Wherever their bones may lie, the courage of heroes is consecrated in the hearts and engraved in the history of the free. Lt Col Honner DSO MC, 39th Commander speaking of the dead from the battle of Kokoda. |
| |
06-03-2008, 03:26 PM
|
#4 | | IP/Mech THE GREAT GAZOO
Join Date: Apr 2005 Location: Colorado, USA
Posts: 12,948
Country: | Quote:
Originally Posted by olbrat After watching a B-17 flying recently, I was curious how the underside ball turret gunner entered/exited the turret. Was it from below or from inside? I had heard a couple of horror stories of how they were trapped if they aircraft had to do a wheels-up landing, etc., but I didn't know if they were true or not. I would think it would be terribly uncomfortable to be in one of those things for hours on end, or stuck in one with the electricity out and so on.
Thanks in advance for any answers. | If a wheels up landng was done with the ball turret down it would crack the fuselage in half or cave into the fuselage. Half the ball was a chunk of extremely thick aluminum casting, the over half was plexiglass, several inches thick.
__________________ "IF ITS RED OR DUSTY, DON'T TOUCH IT" |
| |
06-03-2008, 04:48 PM
|
#5 | | Moderator
Join Date: Aug 2006 Location: Wisconsin
Posts: 2,466
Country: | Here are a couple of pictures of the turrent of a B-17
__________________ 
"Valor does not mean Hero."
Last edited by Micdrow : 06-03-2008 at 04:56 PM.
|
| |
06-03-2008, 04:58 PM
|
#6 | | Senior Member
Join Date: Jun 2006 Location: oregon
Posts: 2,130
Country: | Quote:
Originally Posted by FLYBOYJ If a wheels up landng was done with the ball turret down it would crack the fuselage in half or cave into the fuselage. Half the ball was a chunk of extremely thick aluminum casting, the over half was plexiglass, several inches thick. | I know you have seen the B-17 and B-24 Ball, but at risk of boring others..
First the B-24 Ball was retractable and could be raised into the Fuselage.
Both had a Frame inside the fuselage, which had the oxygen hose and electrical connection for heating inside the turret, entering near the top of the frame and dropping to the Ball (IIRC).
You Could open the aft hatch of the ball Turret from the outside - which was opposite the circular panel the gunner used to sight through... but nearly impossible to go out that way with guns level
The SOP was to rotate the ball so that the 50's were pointed straight down, open and enter the hatch and climb in, then close and lock the hatch from the inside.
In an emergency you rotated the turret to face down and hoped someone was there to help open the hatch and hand you your chute if you chose 'comfort' over safety. Even a small guy was extremely cramped with a chute over the electrically heated suit.
It almost always caused a fuselage structural failure in that location during ditching, and often with a belly landing. |
| |
06-03-2008, 06:34 PM
|
#7 | | Senior Member
Join Date: Aug 2007 Location: San Jose, CA
Posts: 1,749
Country: | No models of the B-17 had a retractable turret? |
| |
06-03-2008, 06:56 PM
|
#8 | | Moderator
Join Date: Aug 2006 Location: Wisconsin
Posts: 2,466
Country: | Quote:
Originally Posted by kool kitty89 No models of the B-17 had a retractable turret? | None that I know of, though they did do some experiments by placing the same nose and tail turrents of a B-24 into a B-17.
__________________ 
"Valor does not mean Hero." |
| |
06-03-2008, 07:58 PM
|
#9 | | Senior Member
Join Date: Jun 2006 Location: oregon
Posts: 2,130
Country: | I agree Paul - I am aware of none - with 3 point landing gear designe rather than tricyscle there was plenty of room - so why add the weiight.
I did love the modified B-17 "liberator" - but like the B-17G chin turret better from a weight standpoint |
| |
06-03-2008, 08:54 PM
|
#10 | | Senior Member
Join Date: Nov 2005
Posts: 151
| I think a few of the very earliest B-17E's used a retractable Bendix ventral turret similar to what was fitted to B-25B's and C's. This turret was sighted through a periscope from a position above the turret in the fuselage. |
| |
06-03-2008, 09:38 PM
|
#11 | | Senior Member
Join Date: Aug 2007 Location: San Jose, CA
Posts: 1,749
Country: | I knew some early B-17E's had the Bendix turret (similar to the top turret used later on iirc) but I don't think it was retractable though. (iirc it's actually slightly smaller in height than the ball turret)
The first B-17E's had the "bathtub" turret from the previous models.
Here's a bendix ventral turret:
The "Swamp Ghost's" Bendix turret: 
Last edited by kool kitty89 : 06-03-2008 at 09:59 PM.
|
| |
06-03-2008, 10:11 PM
|
#12 | | IP/Mech THE GREAT GAZOO
Join Date: Apr 2005 Location: Colorado, USA
Posts: 12,948
Country: | Quote:
Originally Posted by drgondog I know you have seen the B-17 and B-24 Ball, but at risk of boring others.. |  No sweat Bill.
I actually was inside one that was erected on a scaffold. I'm 5'9" and "stuck out" about 6".
__________________ "IF ITS RED OR DUSTY, DON'T TOUCH IT" |
| |
06-03-2008, 10:16 PM
|
#13 | | "Shooter"
Join Date: Sep 2004 Location: Moorpark, CA
Posts: 12,476
Country: | Ugh, I have heard so many bad things about those Bendix turrets. I'd almost rather take my chances in a ball turret. I am not aware of any retractable B-17 ball turrets either. They did have tool kits that were used to jettison the turret in the event of a wheels up landing. If the turret was dropped before landing, the B-17 could be back in the air in a matter of days. If the ball stayed on, it would break the back of the Fortress.
Below is a shot I took in Nine-Oh-Nine last year. It's kind of hard to see the support post going all the way to the top of the fuselage because of the wiring harness above the O2 bottle. 
__________________ http://www.vg-photo.com Wherever their bones may lie, the courage of heroes is consecrated in the hearts and engraved in the history of the free. Lt Col Honner DSO MC, 39th Commander speaking of the dead from the battle of Kokoda. |
| |
06-03-2008, 11:28 PM
|
#14 | | Senior Member
Join Date: Aug 2007 Location: San Jose, CA
Posts: 1,749
Country: | What was wrong with the Bendix turret?
(and I think I was wrong about the early B-17E's using the 'bath tub' turret, the D seems to have been the last to use it with the first ~100 E's having the Bendix turret) |
| |
06-04-2008, 12:32 AM
|
#15 | | Senior Member
Join Date: Nov 2005
Posts: 151
| If you look just aft of the ventral turret on 12443, I think you can see the sighting station for the turret. The Bendix turret on the B-25 had 2 problems: First, it was extremly difficult to use the gunsight, and many gunners got vertigo looking through it. Second, the sight would get oil residue from the engines on the lens, obscuring the view through it. |
| | | Thread Tools | Search this Thread | | | | | Display Modes | Linear Mode |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | All times are GMT -5. The time now is 08:02 PM. |  | |