Ho229 V3 at NASM Garber Facility

[twoeagles]

Two years ago my son was given a backyard tour of the Paul Garber
restoration facility, a perk since he was majoring in military history
at the Naval Academy (how fun was that!?). I asked him to look for
the Ho229 in particular, and with his film based Canon Elph he snapped
one picture, and it isn't great, but here you go. Ho229 V3, for real.
He said it looked as one would expect of a plywood plane sitting damp
for 60 years. Again, my apologies for picture quality - it is a scan from
the 4 by 6 print he mailed to me.

[DerAdlerIstGelandet]

I wish they finally would restore the damn thing, I would love to see it!

[R-2800]

i know i really hope they will restore it before it wasts away along with many others they have in storage, but at least they have it.

[Twitch]

Wherever Henk is these days, he knows I think. Believe he mentioned reading that a favorable decision had been made for its restoration.

They almost didn't have it either. Way back when museum procurers were visiting a salvage yard, I think in Chicago, to acquire a couple other planes and the guy matter-of-factly asks if they want "that old Germam flying wing we got."

[delcyros]

...true.

The Berlin restauration group around techn. museum, which already has experience with other Horten flying wing restaurations put forwards two years ago the suggestion to also restaurate the Ho-229 V3 from Depot Silver Hill.
Problem for negotiations was that this is a very expensive task, and Berlin isn´t going to do it without reward, of course.
A restauration has to conservate the plane for the next 80 years and little documentation is left ourdays.
The Jumo´s are very problematic but they already have some left in stock, I think. Don´t know how well they are preserved in the original, however.

[twoeagles]

Also on display is this engine which I believe is a Jumo, but I am far from
expert on this. Perhaps someone can weigh in.

[delcyros]

As You may see, it doesn´t have the steep increase in engine diameter typical for radial jet engines, so it´s axial layout.
Details of the engine covering strikingly point to Junkers.
This indeed is a late model Jumo-004B4 jet engine.
check out this pages for comparings:
http://xplanes.free.fr/lavo/images/j...jumo004_05.jpg
http://www.geocities.com/h_zoeller/jumo004_a1.jpg

The BMW-003 looks a bit different, mostly due to the lube tanks moved to the engine nose and the accelerator valve and other details:
http://library.thinkquest.org/C00600...es/bmw0031.jpg


cheers,

[Henk]

Ok I talked to one of the people of the NASM and he explained to me that they are waiting for there facility that is being build and then restore her and that donations would be very appreciated since it would be very expensive to restore her.

I wrote to a magazine all about aircraft I get every month and told them about the Horten 229 V3 that is at the NASM and gave them a few pics I had of her there and info and they published it and the response from the public was amazing. They said that the aircraft should be brought here so that our museums here wich have very few WW2 aircraft can restore her and put her on display since a aircraft that is one of a kind should not be left like that.

The person of the NASM said it would still be 6-7 years before she could be started on since their facility is being build.

I breaks my heart to se her like that and makes me mad every time I see her there in that state.

More info on the plane and pics I posted here. http://www.ww2aircraft.net/forum/air...ings-3618.html (Horton Brothers Flying Wings)

[johnbr]

I now that the ho 229 was up for restoration there top restore had just done the front of the B29.He told me that they where to start work on it in 3 weeks he was Reilly looking forward to restoring it.I told him that I do not think the wings they have are the wings for the V3 I think they a pair of test wings.

[delcyros]

What kinds of hint do You have for this estimation?
So far, the only other wings fallen into US hands were those of the glider V1, which are easy to distinguish from those of the V2.
Other segments fallen into us hands late in april 45, but none have been worked far enough to receive Werknummern.

Cheers,

[johnbr]

One there is no tanks in the wings and I was told that the wings have a lot mising in then.When I told them about my thought about them the head of the nasm said that it was possible.

[delcyros]

That´s maybe an interesting question.
Could be, but I have to doublecheck this.

Here some relative quotes from chief constructeur Reimar Horten:

"The main box spare contained all cables and controll rods TO FREE THE REMAINING SPACE OF THE WING FOR FUEL" (R. Horten, Nurflügel, 5th edition (Graz 1993), page 134)
-This is from the shorter english summery, in german, the author is more concrete:"(...) Wir wollten aus Gewichtsgründen und um ein größeres Volumen für den Treibstofftank zu bekommen, DEN GANZEN INNENRAUM DES FLÜGELS ALS TANK VERWENDEN. Voraussetzung dafür war der kraftstofffeste Leim...(...)" (ebd., page 134)
I translate: Because of weight concerns and in order to get a larger fuel bunkerage, we wanted TO USE THE WHOLE INNER SPACE OF THE WING AS FUEL TANK. Precondition for this was the fuel resistant glue agent
this statement implys that there is no fuel tank at all, the whole space is used as fuel tank without the fuel boxes, typical for other planes.
but regarding the Ho-229V-2 (translation):
"(...)The outer wing was all wood made, BUT THE FUEL TANKS WERE MADE FROM ALUMINIUM. The fuel resistent glue agent from Dr. Pinten, Dynamit Nobel AG, was not yet ready in the quantity required, so that we had to send a curier to Troisdorf." - (ebd. page 141)
- This statement underlines, that the V-2 -opposing original plans- had fuel tanks implemented into the wing because they couldn´t get the required amount of fuel resistent glue agents. I expect that much of the construction of the V-2 powered plane was done in a hurry.

This ultimately brings us back to Your information, John.
In case You have seen a wing without fuel tanks we do have two possibilities:
1.) It is the wing of a Ho-229 V1 proptotype, which indeed had - as the original conception asked for- no fuel tanks. The wings of the 1st prototype have fallen into US hands at Brandis airport in mid april 45. But the wings of both prototypes (V1 and V3 respectively) have slightly different sizes because of the major redesign following the delivery of the Jumo-004B engines.
2.) It is indeed the wing of the V3. But in this case, they seems to have gotten the fuel resistant glue agent in the required quantity to build all-tank wings, a previously unknown aspect and a major difference between V-2 and V-3.

cheers,

[Henk]

Like mentioned above.

The wings were intended to be fitted to the V3 but were found on a other site by the US army and no wings were found at the site where they were busy building the Ho-229 V3 and the fact that the V2 prototype were destroyed in the crash that killed the test pilot the wings can not be from it. The Ho-229 V1 glider prototype were very smaller than the V2 and the V3 and were captured by the Russians and later destroyed by them and thus can not be from her and she was intact when they captured her.

So I would agree with you delcyros about the wings and all my info proofs it.

[Henk]

This is the article they printed in the magazine I wrote about the Ho-229. They changed a lot of stuff "according to their sources".

What has happened to the sole surviving GOTHA Go.229, otherwise known as the Horten Ho IX?


GOTHA Go.229

GATHERING DUST and slowly corroding in some forgotten corner of a warehouse at an American aviation museum, are the remains of a unique aircraft which was arguably the forerunner of today's "stealth" fighter and certainly of the so-called "flying wing".
Almost completely forgotten today is an aircraft which has variously been described as the "most startling and unconventional warplane built during World War II" and as a "quantum leap forward in aerodynamic technology".

The aircraft, which ended the war with the designation Go.229, stemmed from a 1931 design for an all-wing glider, the brainchild of German brothers Walter and Reimar Horten. It was their belief that the flying wing was the most efficient form of heavier-than-air flying machine.
They set out to prove this theory with a series of gliders, the first of which they named the Horten 1 and which made its maiden flight in 1931. The glider was cloaked in the utmost secrecy with the aircraft having a wingspan of 12,5 metres and a gross weight of only 200 kg, less than many of the ultralight aircraft flying today.
In 1932, the glider was entered in the Rhon gliding championships which it won hands down and immediately began to attract the attention of the world press. To protect the design's secrets, the wooden-constructed Horton 1 was burnt along with all the models the brothers could find. Later they made other models under conditions of utmost secrecy.
The second of their gliders, the Horten 2, was flown in 1934 in both glider and powered versions, the wingspan having been increased to 16,45 metres and the all-up weight nearly doubled to 377 kg. Despite its larger size, the Horten 2 had a more stable glide path than its predecessor and boasted a sink rate of only 0,78 metres per second.
Next came the Horten 3 which, unlike the other two which were built in Bonn, was constructed at Templehof Airport, Berlin, and was completed just before the outbreak of WWII. By this time the Horten brothers were already in the Luftwaffe, but their design and the aircraft did not attract much attention from the authorities.
The Horten 3 was covered in metal as against the plywood used in the previous two examples as the latter material was deemed too cumbersome and was unable to stand up to the stresses and strains imposed by flight. The sink rate of this aircraft bettered that of the previous model, and was even further improved with the Horten 4, now known as the RLM-251, which was built in 1941.

The Horten brothers' work finally started to pay off when, in 1942, they were tasked with designing a jet-powered version of their flying wing. But before this could fly, they had to build a similar aircraft in which Luftwaffe pilots could learn to fly the design. This aircraft, designated the Ho VII flew in 1943. It had tandem dual controls and was powered by two 240 hp AS.10C piston engines mounted in a pusher configuration.

Twenty of these aircraft were ordered, but only two were built, the remaining 18 orders later being cancelled.
Meanwhile, design and construction of the definitive jet fighter, the Ho.IX, had already begun when the chief of the Luftwaffe, Reichsmarschall Herman Goering, was shown the plans. He was so impressed that he issued a directive that the aircraft should be built as soon as possible.
Accordingly, work on two prototypes, the was stepped up, the former being planned as a glider, but later modified to be equipped with two BMW 003A turbojets. Flight trials began in May 1944 and the aircraft type immediately became known for its outstanding handling characteristics.
The aircraft was basically made of two sections, the centre section and outer panels. The centre section was thick enough for the installation of the two jet engines, the cockpit, guns and tricycle undercarriage and nearly all the fuel load. It was made of welded steel tube with a plywood skin, except near the engines where steel was again used.
The sweptback, slender outer wings were of all wood construction. The whole structure was stressed to +7g, which was strong enough to enable the aircraft to out-turn virtually any other aircraft then flying. By May 1944 the aircraft's tests were so successful that it led to full governmental blessing and control passed to the Gother Waggonfabrik. The type was redesignated the Go.229.

A further seven prototypes were ordered plus 20 production fighters. They were to have had a span of 16,75 metres, be powered by two Junkers Jomo 004B engines and armed with four 30 mm guns. The cockpit was to be equipped with a simple ejection seat.
The Go.229 V2 began its flight test programme at Oranienburg in January 1945. Takeoff distance was less than 450 metres and handling was described as "superb".
By early March the landing gear was being retracted and speed had reached just over 430 knots. The trials were going exceedingly well when the aircraft crashed following an engine failure.

This sounded the death knell of the programme and production was cancelled leaving production prototype V3 almost complete and many other Go.229s in various stages of construction.
What happened to these aircraft afterwards can only be surmised, although it is known that at least one example was captured by the advancing American forces and later sent back to the United States along with various other aircraft.

It is doubtful that the type ever flew again - certainly there is no known record of a flight having been undertaken by the Americans. It is known, however, that at least one example still exists, although in a much disassembled form. It was seen and photographed in the warehouse of a museum - believed to be that of Planes of Fame, in California, although this could not been confirmed by the time of writing.

Whatever the ultimate fate of this remaining aircraft, the fact remains that it demonstrated all too clearly that German aerospace technology was well ahead of that of the Allies, and the outcome of the air war over Europe can only be guessed at had Germany not succumbed to the might of the advancing armies when it did.

SPECIFICATIONS
Gotha Go.229A-0 single-seat fighter-bomber.

Wingspan: 16,76 m
Length: 76,47 m
Height: 2,80 m
Wing area: 52,5 sq.m

Weights
Empty equipped: 4600 kg
Max. overloaded weight: 9000 kg.

Performance
Max. speed: (39000 ft): 528 kt
Rate of flimb: 4330 ft/min
Service ceiling: 52500 ft
Range (internal fuel): 6376 nm
Range with drop tanks: 1064 nm

Armamen
Four 30 mm Mk.103 or Ml.108 cannon and two 1000 kg bombs.
Engines: two Junker Jomo 004B turbojets, each rated at 1962 lbs thrust.

[delcyros]

Dear Henk, there are a lot of myths around about the Ho-229.
I don´t want to critizise You as all this indeed can be found on the Internet but this doesn´t mean that it´s true.
Let me correct some minor points, friend.

Originally Posted by Henk

The glider was cloaked in the utmost secrecy with the aircraft having a wingspan of 12,5 metres and a gross weight of only 200 kg, less than many of the ultralight aircraft flying today.
In 1932, the glider was entered in the Rhon gliding championships which it won hands down and immediately began to attract the attention of the world press. To protect the design's secrets, the wooden-constructed Horton 1 was burnt along with all the models the brothers could find.

The actual wingspan of the Ho-I "D-Hangwind" (also named "Alexander Lippisch") was 12,40 m, the empty weight about 120 Kg (264 lbs). It should be noted, that there was ABSOLUTELY NO SECRECY about the Ho-I, since I have some press prints about it´s participation of the "BONN-Hangelar Großflugtag 1934(!)" events. The plane never participated in the Rhön gliding competitions (something the later models did, only) and wasn´t burnt because of secrecy but simply because they found nobody (sounds silly but this is exactly what Dr. Horten wrote in his book...) to care about the plane. The Hortens themselves had no space for the plane and the design criteria showed that the wing wasn´t able for disassembling for transports so they HAD TO BURN IT anyway.

Originally Posted by Henk

Later they made other models under conditions of utmost secrecy.
The second of their gliders, the Horten 2, was flown in 1934 in both glider and powered versions, the wingspan having been increased to 16,45 metres and the all-up weight nearly doubled to 377 kg. Despite its larger size, the Horten 2 had a more stable glide path than its predecessor and boasted a sink rate of only 0,78 metres per second.

Best gliding path of the Ho-2 glider was 1:24@ 72 Km/h; sink rate 0.70 m/sec @ 60 km/h. Wingspan was 16,50m, altough these values varied from variant to varient with the powered versions mentioned by You have been heavier and not that streamlined. The Ho-II also had no secrecy, maiden flight was in May 1935 at Bonn-Hangelar. It should be noted that the Ho-II was fully able to aerial acrobatics and used in this manner with statisfaction by Hanna Reitsch and others. Dr. Alexander Lippisch coworked with the Hortens on some major wing calculation works, from which the airplane greatly benefitted in comparison to the Ho-I (bell shaped lift distribution made it stable in flight).
A small 59 Kw HM 60R engine drove the powered Ho-IIm variant, which had a sink rate of 0.85 m/s and a max take off weight of 450 Kg. Despite the low poweroutput it climbed 3000 ft in 2 1/2 min and retained full acrobatic performances. A small "Habicht"-series of Ho-II L gliders followed
The conventional "Hols der Teufel"-glider followed in 1936. It was a testbed for an entirely synthetic material plane usinf Mipolan, Astralon and Phenol.
It was the worlds first "plastic plane".
The Ho-Va, still not noticed by the RLM, seems to have stood in relation to the "Hols der Teufel", since it featured synthetic construction materials and twin engines (HM60R). Altough Horten doesn´t explicitely tell when the design work begun, I conclude that this happened somewhen in mid 1938, with constrcution works starting in 1939.
(to be continued)