|
| |||||||
| Group Builds Builds of models done by members of the forum as a group. |
 |
| | LinkBack | Thread Tools | Display Modes |
02-13-2009, 05:08 PM
| #31 | |
| Siggy Master   Join Date: Jun 2005 Location: Poland
Posts: 13,972
| Quote:
I can make you sure I have known all advantages and disadvantages of both kits.And there is much more of them than you have mentioned above.Your models looks very nice, especially the Anthon Hackl's A-6 which is one of my favourite as well.But if you made A-6 the Pitot tube shouldn't have been on the wingtip, the one was moved there with A-8 wing. Here you are some pics of right upper half of wing with corrections to panel lines, the aileron width ( also made to the lower half ).The same corrections were made to the left one.Also notice the correction to the shape of the wingtip.Of course corrections to both upper halves of the wing haven't been finished yet.When all is finished I have to use some putty to remove these incorrect and old panel lines. Any questions?
__________________  | |
|         |
|
02-13-2009, 05:57 PM
| #32 |
| Senior Member  Join Date: May 2008 Location: New Zealand
Posts: 4,998
| Super stuff Wojtek! 
__________________  "When all else fails read the manual" |
|
| |
|
02-13-2009, 06:28 PM
| #33 |
| Senior Member  Join Date: Aug 2008
Posts: 9,062
| More Wurgermajic! Superb work Wojtek.
__________________  |
|
| |
|
02-13-2009, 06:46 PM
| #34 |
| Siggy Master Join Date: Jun 2005 Location: Poland
Posts: 13,972
| THX Daniel and Terry. Of course, before I started engraving of hese corrected panel lines I had had to remove the MG-151 housing covers.I did it with a sharp razor blade.These housings have to be repositioned slightly back.
__________________ |
|
| |
|
02-13-2009, 07:53 PM
| #35 |
| Senior Member Join Date: May 2008 Location: New Zealand
Posts: 4,998
|  Very impressed
__________________ "When all else fails read the manual" |
|
| |
|
02-13-2009, 08:25 PM
| #36 |
| Senior Member Join Date: Aug 2008
Posts: 9,062
| Nice work Wojtek. Reminds me, I need to make some of those for my old Hasegawa 1/32nd scale A8. I built it 30 years ago, and only noticed they weren't moulded onto the wings when I photographed it a few weeks ago!
__________________ |
|
| |
|
02-13-2009, 08:29 PM
| #37 |
| Siggy Master Join Date: Jun 2005 Location: Poland
Posts: 13,972
| So have Hasegawa forgotten about them or you ? 
__________________ |
|
| |
|
02-13-2009, 11:43 PM
| #38 |
| Senior Member Join Date: Aug 2008
Posts: 9,062
| Hasegawa - the wing-tops are/were smooth, with no parts in the kit at that time, even though it was the A8. I had some plan drawings, which showed the under-wing hatches, which I had to mould as these were not on the kit parts either, but the plan was a multiple sheet, from A3 to A8, and only showed the earlier top wing! Not a problem, as the model needs some repair and corrections to the colour scheme, so I'll add all the missing bits, plus a little more detail, when I start to 'update' it.
__________________ |
|
| |
|
02-14-2009, 12:15 AM
| #39 |
| Senior Member  Join Date: Nov 2006 Location: Queensland, Australia
Posts: 3,552
 | Looking forward to this one Wojtek! Great start!
__________________  "Success is nothing more than taking advantage of an opportunity." - Hitman! - The Technical Guide for the Independent Contractor. |
|
| |
|
02-14-2009, 12:26 AM
| #40 |
| Senior Member  Join Date: Feb 2007 Location: Melbourne, Victoria
Posts: 6,731
| Great work my friend 
__________________  |
|
| |
|
02-14-2009, 04:49 AM
| #41 |
| Senior Member  Join Date: Aug 2006 Location: billingham nr middlesbrough uk
Posts: 3,115
| great work Wojtec, i'm always amazed at what you can do with a model kit
__________________  "We're not easily frightened. Also we know how hard it is for an army to cross the Channel — the last little corporal to try it came a cropper. So don't threaten or dictate to us until you're marching up Whitehall! ...and even then we won't listen!" quote from B.O.B movie |
|
| |
|
02-14-2009, 04:55 AM
| #42 |
| Siggy Master Join Date: Jun 2005 Location: Poland
Posts: 13,972
| THX for all of you.
__________________ |
|
| |
|
02-14-2009, 05:13 AM
| #43 |
| Senior Member  Join Date: Jun 2008 Location: London, England.
Posts: 839
| Blimey Wojtek, talk about attention to detail! The E. Mombeek "Sturmstaffel 1" book went in the mail to you yesterday morning... Now, how can I convince you to make that Fine Molds Me410 your next project? That I HAVE to see!
__________________  |
| |
|
02-14-2009, 05:56 AM
| #44 |
| Siggy Master Join Date: Jun 2005 Location: Poland
Posts: 13,972
| THX Paul. I can take your idea into consideration.The Me410 has been tempting me much more.
__________________ |
|
| |
|
02-14-2009, 06:00 AM
| #45 |
| Senior Member  Join Date: Oct 2006 Location: Adelaide Sth. Aust.
Posts: 12,511
| fantastic work My friend!
__________________  |
|
| |
|
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
