ADS NOT DISPLAYED TO REGISTERED USERS.
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 29

MTO GB Extension.

Group Builds Discuss MTO GB Extension. in the Modeling Section forums; Looks like there are quite a few builds a long way from completion, and there's only two weeks to go ...

  1. #1
    Benevolens Magister Airframes's Avatar
    Join Date
    Aug 2008
    Posts
    33,203
    Country
    United Kingdom

    MTO GB Extension.

    Looks like there are quite a few builds a long way from completion, and there's only two weeks to go to the 'official' end of the build.
    So, unless anyone has any strong objections, the MTO Group Build will be extended to Sunday, 13th December.


  2. #2
    Siggy Master Wurger's Avatar
    Join Date
    Jun 2005
    Location
    Poland
    Posts
    27,627
    Country
    Poland
    No problem for me. I think they can get much time for building of their models. But the date you have esuggested should be the deadline.

  3. #3
    Senior Member
    Join Date
    May 2006
    Location
    North Carolina
    Posts
    1,719
    Country
    United States
    Quote Originally Posted by Airframes View Post
    Looks like there are quite a few builds a long way from completion, and there's only two weeks to go to the 'official' end of the build.
    So, unless anyone has any strong objections, the MTO Group Build will be extended to Sunday, 13th December.

    WOOT! No objections from THIS corner!

  4. #4
    Senior Member imalko's Avatar
    Join Date
    Mar 2009
    Location
    Vojvodina, Serbia
    Posts
    3,363
    Country
    Serbia
    No objections here either, but we must be careful not to extent Group Builds to much otherwise the planned GB schedule will be completely disrupted.

    "Find your enemy and shoot him down - everything else is unimportant."


  5. #5
    Benevolens Magister Airframes's Avatar
    Join Date
    Aug 2008
    Posts
    33,203
    Country
    United Kingdom
    I agree. Four months should be sufficient, and we can't continue to over run, so 13th December is the definite, final deadline!
    If members still wish to post an un-finished model as completed, then it will be classed as such in order to gain the GB icon, if it's at least 75% complete. But, of course, it can only be scored accordingly, and can not gain a placing.

  6. #6
    Siggy Master Wurger's Avatar
    Join Date
    Jun 2005
    Location
    Poland
    Posts
    27,627
    Country
    Poland

  7. #7
    Senior Member B-17engineer's Avatar
    Join Date
    Dec 2007
    Location
    Revis Island.
    Posts
    14,428
    Country
    United States
    Yay!!! Thanks Terry!! That makes me feel better about the P-40...

  8. #8
    Senior Member ozhawk40's Avatar
    Join Date
    Feb 2007
    Location
    Live on the Oz West Coast - Perth
    Posts
    1,920
    Country
    Australia
    All okay with me Terry, it would be great to see some more finishers in this GB.

    Cheers

    Peter

  9. #9
    Senior Member Wayne Little's Avatar
    Join Date
    Oct 2006
    Location
    Adelaide Sth. Aust.
    Posts
    35,532
    Country
    Australia
    ..need every extra day I can get!

  10. #10
    Senior Member lesofprimus's Avatar
    Join Date
    Jul 2004
    Location
    Long Island Native in Mississippi
    Posts
    19,141
    Country
    United States
    Been there done that, the extension is needed.....

  11. #11
    Senior Member vikingBerserker's Avatar
    Join Date
    Apr 2009
    Location
    South Carolina
    Posts
    17,031
    Country
    United States
    Wow, this was an unexpected bonus!

  12. #12
    Senior Member
    Join Date
    May 2006
    Location
    North Carolina
    Posts
    1,719
    Country
    United States
    Exactly WHEN on Sunday? Seriously. It's going to take about a minimum of 24 hours for my clear coats to set up which means any extra time I can squeeze out makes a difference.

    BTW, the HS 126 and Hs 123 are both waiting for the clear coats to dry before I add decals.

  13. #13
    Benevolens Magister Airframes's Avatar
    Join Date
    Aug 2008
    Posts
    33,203
    Country
    United Kingdom
    Let's say 23:59 hours local on Sunday, 13th December. However, the group of photos of the finished model(s) should be posted no later than 23:59 hours local on Monday, 14th December.
    I realise that there can be last minute tasks that can take time, and delay possible completion by the deadline. However, the GB has run for four months, plus an extra two weeks, and it will be unfair to others to carry on extending, and, as has been pointed out, further extensions can, and would, disrupt the ongoing timetable of GB's. Those models posted as 'Finished' which are not 100% complete, but more than at least 75% complete, will be judged taking into account such things as a missing decal, (where the item is awaiting receipt, for example), and similar, as long as such deficiences are notified in the post accompanying the submission of the finished photos.
    Those models submitted which are less than 75% complete, will be accepted in order to gain the GB icon, but can not be scored to the point of being awraded a First, Second or Third placing.

  14. #14
    Senior Member
    Join Date
    May 2006
    Location
    North Carolina
    Posts
    1,719
    Country
    United States
    Quote Originally Posted by Airframes View Post
    Let's say 23:59 hours local on Sunday, 13th December. However, the group of photos of the finished model(s) should be posted no later than 23:59 hours local on Monday, 14th December.
    I realise that there can be last minute tasks that can take time, and delay possible completion by the deadline. However, the GB has run for four months, plus an extra two weeks, and it will be unfair to others to carry on extending, and, as has been pointed out, further extensions can, and would, disrupt the ongoing timetable of GB's. Those models posted as 'Finished' which are not 100% complete, but more than at least 75% complete, will be judged taking into account such things as a missing decal, (where the item is awaiting receipt, for example), and similar, as long as such deficiences are notified in the post accompanying the submission of the finished photos.
    Those models submitted which are less than 75% complete, will be accepted in order to gain the GB icon, but can not be scored to the point of being awraded a First, Second or Third placing.
    Thanks Terry. I wasn't looking for another extension. Just wanted to know what the deadline time was.
    The extra day on the pics gives me a little wiggle room on letting the gloss coats dry. Thanks again for clarifying.

    I suppose by local time that means the time zone of the builder?

  15. #15
    Benevolens Magister Airframes's Avatar
    Join Date
    Aug 2008
    Posts
    33,203
    Country
    United Kingdom
    No problem Dwight. Yes, the time zone of the builder. Otherwise, trying to juggle time zones with judges in Europe, the USA and Upside Down Land will get confusing - and I'm easily confused!!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86