![]() |
| | #46 |
| Senior Member Join Date: Nov 2006
Posts: 268
| Sorry this is not about the chutes. I found yesterday that "gun heater" in the wing gun bays had been discontinued on the -B&-C and later models. Therefore the heater, a box like object in lighter colors can be seen on the gun bay illustrations, was only for the P-51A and (possibly) the former models. The heater was just a gasoline-air stove routing the air-fuel mixture from the engine carb via thick tubings laid in the wheel well and the wing. I presume the heater itself was sufficient enough to warm up the guns but it looks a bit too risky to have any kind of fire source in the structure. New type of electric gun heater seemed to be introduced on the later models.
__________________ Guy Gibson; "Hello P-popsie. Are you all right?" "I think so leader... Last edited by ppopsie; 08-05-2009 at 02:33 AM. |
| | |
| | #47 |
| Senior Member Join Date: Nov 2006
Posts: 268
| I hope this helps. Am pleased to mention that the blueprints of the Mustang is now supplied in the form as shown below. I am grateful to Sicuro-sama for providing me a set of (thousands of ) materials which will require more than a few years to understand, and a joy of lifetime of mine at such a cost. North American Aviation P-51 Aircraft Blueprints Engineering Drawings (R)
__________________ Guy Gibson; "Hello P-popsie. Are you all right?" "I think so leader... |
| | |
| | #48 | |
| Senior Member Join Date: Mar 2007 Location: over the hill and far away
Posts: 183
| Quote: Ouch... Price : $ 98.85 USD + S&H, cheers Jerry | |
| | |
| | #49 |
| Senior Member Join Date: Feb 2007 Location: Live on the Oz West Coast - Perth
Posts: 435
| I can't read a thing on that drawing ppopsie - can it be a bit more hi res, or is that it? Cheers Peter |
| | |
| | #50 |
| Junior Member Join Date: Oct 2009 Location: Helsinki
Posts: 9
| Super Cool. Thanks! |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
| |